View Log Styles
  Wall Logs:

          All the Kiln Dried, Eastern White Pine Logs needed for the 1st story exterior walls. All logs are independently

          graded to the highest building standards. Each log is machine planed, uniformly milled, visually inspected and

          hand sorted to maximize quality. Full logs provide superior energy efficiency for exterior walls.

  Log Plate:

          All the graded 2" x 4", 2" x 6" or 2" x 8" #2 or better lumber for the starter plate. This enables the logs to be

         fastened to a solid continuous surface. This plate will help in leveling and squaring your log walls.

  Engineered Log Fasteners: (OLYLOG by OMG )

          All the tempered and coated, engineered log fasteners needed for fastening all logs @ 18" on center. These

          engineered log fasteners require no pre-drilling and countersink themselves; therefore reducing construction time.

          Installation bits are included.

  Log Home Caulking: (LOG BUILDER by SASHCO )

          All the special tan colored caulking needed for stacking the logs. Large, 30 ounce tubes reduce construction

          time. Log Builder caulk is guaranteed to stay flexible for 20 years. Specially formulated as a log home sealant, it is

          used on the top of all logs, at corner joints and butt joints.

  Hardwood Dowels:

          All the 7/8" Hardwood Dowels needed for the corner joints and butt joints. Combined with caulk, these dowels

          provide a perfect seal to prevent weather from entering your home.

  Foam Insulation Gasket: (by EMSEAL)

         All the 3/8"x1/2" Asphalt Impregnated foam gasket needed for stacking the logs. The gasket is placed on top

          of the log to provide excellent sealing. EMSEAL gasket is decay resistant, insect resistant and waterproof. 

          After installation, this gasket swells and totally eliminates any possibility of water and air infiltration.